Marathon-computer FTvirtual Server Manual de usuario descargar pdf (Pagina 31)

Marathon Technologies Corporation 25

On the Endurance Network Setup page make sure that the desired

adapter is still highlighted and select Use currently configured IP

addressing. Click Next to continue.

3. If your network configuration will not use CoServer Link 2, select No

Coserver Link 2 and then click Next without selecting an adapter.

If you will be using CoServer Link 2, then on the Configure CoServer

Link2 page, highlight the adapter you wish to assign as CoServer Link2

in the Connection column. Select the adapter based upon the PCI loca

tion-to-switchbay mapping you established during planning and prepara-

tion. You can use Table 1 to assign IP addresses for internal CLink

connections.

Right click on the adapter selection and choose Internet Protocol Prop-

erties from the action menu. On the Internet Protocol Properties page

select Use the following IP address and fill-in the appropriate address.

Then, enter Subnet mask 255.255.255.0 and click OK.

On the Endurance Network Setup page make sure that the desired

adapter is still highlighted and select Use currently configured IP

addressing. Click Next to continue.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Sin comentarios

Marathon-computer FTvirtual Server Manual de usuario Pagina 31